Plywood is what

Plywood is manufactured out of many sheets of veneer, or plies, pressed together and glued, with their grains going in opposite directions. It tends to be extremely strong, and is treated in many different ways depending upon its intended application.

Plywood production can typically be divided into three manufacturing stages: veneer manufacture; clipping, drying and up-grading; and panel layup, pressing and finishing. The more details: Plywood thickness: 1.5mm-32mm; Plywood size: 1220*2440,1220*2500......(4*8 is the common size); Plywood moisture:6-18%; Plywood grades: according to the veneer on both face and back. Splits, knots, knot holes and resin pockets are cut or routed out before being filled with putty or pathed. Plywood can be processed futher with tongue and groove edges; over laid, given a textured surface finish; and edge jointed to give oversized boards.

Plywood is very popular material in home building and furniture, particularly for its strength as a roofing underlayment. Plywood can be divided into outside use and interior use.Our plywood can be divided into commercial plywood, film face plywood and fancy plywood

In addition, our plywood is famous for its premium quality. Quality is our plywood’s spirit. In plywood manufacturing process, original material would be picked out twice times. Firstly, face and core veneer would be both checked and picked out. Our main core veneers are poplar,eucalyptus and pine.Secondly, we view the glue as important as our blood , the glue would be detected many times to be good quality before used. Thirdly, both sides of the based board would be repaired twice times. Last, in packing process, the production would be checked two more times before sent to our customers.

This is our plywood, is your plywood,too!